The starter type you have selected is the Delco Type 38MT design

Please review the starters presented below and then select the proper application for your vehicle's engine.

38MT38MT

DATA BOX

In order to make the exact choice, please be sure to answer the following questions about your application:

  1. Does your starter have the same dimensions as shown?
  2. What is the voltage of your vehicle system?  It has to be either 12 or 24.
  3. How many teeth are on the starter drive.  The most popular will be 10, 11 or 12.
  4. Motors with 12 teeth gears have ½ inch mounting holes, those with 10 or 11 will have 3/8 inch mounting holes.
  5. Every 38MT is equipped with an OE type voltage boost switch.

 
Starter
Type		 Voltage Teeth Mounting
Bolt		 Note Part number
38MT 12 10 3/8” Cat C7/3126 Cummins 8.3 ISC 381210VB
38MT 12 10 3/8” International 444CL& T-444E 381210VB-1
38MT 12 10 7/16” Cummins QSB 6.7L, QSC 8.3L and some ISB engines 381210VB-2
38MT 12 11 3/8” MBE 900/904/926 381211VB
38MT 12 12 1/2” Cummins 8.3/8.9 engines International DT-466 381212VB
38MT 24 10 3/8” Cummins 8.3 ISB engines 382410VB
38MT 24 12 1/2” Cummins 8.3 ISC engines 382412VB

If you care to double check your selection using an OEM number, please enter it. Our program will also allow you to make a search with partial numbers, as long as you enter any four of the numbers or letters in a row.

Search Our Store by OEM# or Keyword

The OEM match will take you to our exact replacement for your unit.

If you are still not sure of the selection, please call
888-598-8105
and a technician will immediately assist you!

©2008-2009 SAASE / site maintained & hosted by Rowan Digital LLC